Freestar V6-4.2L VIN 2 (2004)
^
Windstar, Freestar, Monterey, Taurus, and Sable with column shifter - Must face to the right rear of the vehicle with the flat edge of vent
base parallel to the chain cover boss (Figure 1)
^ Taurus and Sable with floor shifter - Must face to the rear of the vehicle with the flat edge of vent base parallel to the chain cover boss (Figure 2)
10.
Install one end of a 24" (61 cm) long piece of 5/16" (8 mm) vacuum hose to the 90° vent stem and secure with a small hose clamp.
11.
Route the vacuum hose back and up to the cowl area and down next to the brake master cylinder. Carefully tie rap the hose in place next to the
brake master cylinder (do not tie rap to brake lines), be sure the end of the hose is facing down and not directly above anything hot.
