ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Technician Safety Information|Page 7854 > < Technician Safety Information|Page 7852
Page 8
background image

Part 2

1. WARNING:  Front seat back trim covers installed on seats equipped with side air bags cannot be repaired, they are to be replaced

(cleaning is permissible).

NOTE:  If installing a new side air bag module, use new retaining nuts. If the same side air bag module is to be reused then reuse the side air bag
module nuts.

Install the parts in the order indicated in the illustrations and tables.

2. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the seat

removal and installation procedure.

NOTE:  Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.

Install the seat on the side with the affected side air bag.

3. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the

supplemental restraint system (SRS) deactivation/reactivation procedure. Refer to Air Bag(s) Arming and Disarming.

Reactivate the supplemental restraint system (SRS). Refer to Air Bag(s) Arming and Disarming.

4. WARNING:  The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure

Technician Safety Information|Page 7854 > < Technician Safety Information|Page 7852