Freestar V6-4.2L VIN 2 (2004)
Seat Belt: Vehicle Damage Warnings
CAUTION:
-
There are three occupant classification sensor (OCS) system service kits available for this vehicle (base seat, heated seat and climate
controlled seat). Always make sure the correct OCS service kit is installed.
-
It is necessary to rezero the OCS system when a front passenger seat cushion is disassembled, a new trim cover installed, a seat side shield
removed, or an OCS service kit is installed. A scan tool is used to trigger the active command to carry out rezeroing of the OCS system.
-
Make sure the seat is completely assembled before rezeroing.
-
The following precautions must be taken before rezeroing the OCS system:
-
Make sure the OCS system components are connected and no faults are present.
-
Make sure the OCS system is not at a temperature below 0°C (32°F) or above 45°C (113°F) when initiating the rezeroing process. If
the vehicle has been exposed to extreme cold or hot temperatures, the vehicle must be exposed and kept at a temperature within the
limits, 0°C to 45°C (32°F to 113°F), for a minimum of 30 minutes.
-
Make sure nothing is present on the passenger seat before rezeroing and nothing is placed on the seat during the rezeroing process.
-
Make sure a minimum eight second time period has passed after cycling the ignition switch ON before the rezeroing process.
