Freestar V6-4.2L VIN 2 (2004)
Impact Sensor: Description and Operation
IMPACT SENSORS
WARNING: The restraints control module (RCM) orientation is critical for correct system operation. If a vehicle equipped with an air bag
supplemental restraint system (SRS) has been involved in a collision in which the vehicle center tunnel area has been damaged, inspect the
RCM mounting and bracket for deformation. If damaged, a new RCM must be installed whether or not the air bags have deployed. In
addition, make sure the area of the RCM mounting is restored to its original condition.
The RCM incorporates integral sensors that are not separately serviceable. All vehicles will have a front impact severity sensor located behind the
front radiator grille under the hood latch assembly. There are two side impact sensors located under the front seats beneath the carpet. In addition there
are two side impact sensors mounted near the driver and passenger C-pillars when the vehicle is equipped with driver and passenger safety canopy
modules/seat side air bags. The RCM is mounted on the center tunnel under the instrument panel. Mounting orientation is critical for correct operation
of all impact sensors.
