Freestar V6-4.2L VIN 2 (2004)
11. Remove the plug from the cooler tube fitting.
12. Remove the flex hose from the cooler tube.
13. NOTE: Clean the cooler tube fitting before installing it to verify a good connection and to prevent any leaks.
Install the lower cooler tube.
14. Install the lower retaining clip
15. Fill the transaxle with clean automatic transmission fluid.
16. Start the engine and move the transaxle range selector lever through all the ranges allowing the transaxle to engage in each position.
17. Check the transaxle at normal operating temperature. Fluid should be within the crosshatched area of the fluid level indicator. If the fluid is not
within the crosshatched area add fluid in 0.2365 liter (1/2 pint) increments until the correct level is achieved.
