Freestar V6-4.2L VIN 2 (2004)
4. Remove the screws and the instrument panel opening reinforcement cover.
5. Remove the transmission selector cable.
1
Disconnect the transmission selector cable end from the steering column.
2
Push the lock tab and separate the transmission selector cable from the bracket.
3
Remove the transmission selector cable from the vehicle.
Item 1: Transmission Selector Cable End Installation Note
1. Verify that the engine will start in PARK and NEUTRAL and that the reverse lamps illuminate in REVERSE. If not, the transmission selector
cable will need to be adjusted. For additional information, refer to Selector Lever Cable Adjustment. See: Adjustments/Selector Lever Cable
Adjustment
