Freestar V6-4.2L VIN 2 (2004)
Seals and Gaskets: Service and Repair
Front Axle Halfshafts, Bearings and Seals
Special Tool(s)
Material
1. With the vehicle in NEUTRAL, position on a hoist.
2. Remove the front wheel and tire assembly.
3. CAUTION: Remove or tape the brake pads to prevent them from falling out of the anchor plate.
CAUTION: To prevent damage to the brake hose, do not allow the disc brake caliper to hang suspended from the hose.
NOTE: Remove the front brake anti-lock sensor harness from the clip.
Remove the bolts and position the disc brake caliper aside.
