Fusion L4-2.3L VIN Z (2006)
12. If equipped, disconnect the power mirror electrical connector.
13. Remove the 10 door module bolts and the window regulator motor electrical connector.
-
To install, tighten to 8 Nm (71 lb-in).
14. Remove the front door module. If installing a new door module, transfer parts as necessary.
15. To install, reverse the removal procedure.
-
For Zephyr only, if installing a new LH or RH front window motor, it must be initialized. If installing the original front window motor, it must
be de-initialized, then initialized.
