Fusion L4-2.3L VIN Z (2006)
Rear Door Panel: Service and Repair
REAR DOOR TRIM PANEL
Removal and Installation
NOTE: RH side shown, LH side similar.
1. Remove the rear door handle bezel.
-
Remove the screw cover.
-
Remove the screw.
-
Disconnect the electrical connector.
2. Remove the upper rear trim panel screw.
3. Remove the rear door handle cover screw.
-
Remove the screw cover.
-
Remove the screw.
4. Remove the rear door trim panel.
-
Disconnect the electrical connector.
5. To install, reverse the removal procedure.
