Fusion L4-2.3L VIN Z (2006)
7. Disconnect the wiring harness retainers.
8. Remove the wiring harness cover plate and disconnect the 2 door latch cable retainers.
9. Remove the 10 door module bolts.
-
To install, tighten to 8 Nm (71 lb-in).
7. Disconnect the wiring harness retainers.
8. Remove the wiring harness cover plate and disconnect the 2 door latch cable retainers.
9. Remove the 10 door module bolts.
-
To install, tighten to 8 Nm (71 lb-in).