Fusion L4-2.3L VIN Z (2006)
9. Remove the rear shock-to-trailing link lower bolts and flagnuts.
-
To install, tighten to 115 Nm (85 lb-ft).
10. Remove the 4 bolts and cone washers (2 each side) from the trailing links-to-vehicle body.
-
To install, tighten to 133 Nm (98 lb-ft).
CAUTION: The rear subframe must be secured to the lifting table. The rear subframe can become unstable and fall from the lifting
table.
11. Position the lifting table under the rear subframe.
12. Remove the 4 (2 each side) front bushing brace-to-body bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
