Fusion L4-2.3L VIN Z (2006)
Oil Pick Up/Strainer: Service and Repair
Oil Pump Screen and Pickup Tube
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the oil pan.
3. NOTE: Discard the gasket and clean and inspect the gasket mating surfaces.
Remove the 2 bolts and the oil pump screen and pickup tube.
^
To install, tighten to 10 Nm (89 inch lbs.).
4. To install, reverse the removal procedure.
