Fusion L4-2.3L VIN Z (2006)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator
LH
TEMPERATURE BLEND DOOR ACTUATOR - LH
Removal and Installation
NOTE: The LH temperature blend door actuator can be accessed from below the LH side of the instrument panel.
1. Disconnect the LH temperature blend door actuator.
2. Remove the 2 LH temperature blend door actuator screws.
3. Remove the LH temperature blend door actuator.
4. To install, reverse the removal procedure.
RH, Dual-Zone EATC
TEMPERATURE BLEND DOOR ACTUATOR - RH, DUAL-ZONE EATC