ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/C - Intermittent Blower Operation/Works on High Only|Page 7182 > < A/C - Intermittent Blower Operation/Works on High Only|Page 7176
Page 1
background image

Blower Motor: All Technical Service Bulletins
A/C - Intermittent Blower Operation/Works on High Only

TSB 08-6-1

03/31/08

INTERMITTENT/HIGH BLOWER MOTOR

OPERATION - EMTC, DATC, AND/OR EATC CLIMATE
CONTROL SYSTEMS

FORD:
2006-2007 Fusion

LINCOLN:
2006 Zephyr
2007 MKZ

MERCURY:
2006-2007 Milan

ISSUE
Some 2006-2007 Fusion/Milan, 2006 Zephyr and 2007 MKZ equipped with Electronic Manual Temperature Control (EMTC), Dual Automatic
Temperature Control (DATC) and/or Electronic Automatic Temperature Control (EATC) Systems may exhibit an intermittent blower motor operation or
a blower motor that may shift to and remain at high speed. In certain intermittent conditions, cycling the ignition or running the blower motor on high
speed for one minute may help to return it to normal blower motor operation.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1.

Check the blower motor bar code numbers on the vehicle.

NOTE

THE BLOWER MOTOR BAR CODES NUMBERS ARE BELOW THE BAR CODE. (FIGURE 1)

2.

If the blower motor bar code numbers are not 52423994, replace it.

3.

If the blower motor part number is correct and the symptoms are present, follow normal diagnostic procedures in the Workshop Manual (WSM),
Section 412-00. Please refer to the online version for the latest procedure.

Parts Block

A/C - Intermittent Blower Operation/Works on High Only|Page 7182 > < A/C - Intermittent Blower Operation/Works on High Only|Page 7176