Fusion L4-2.3L VIN Z (2006)
Refrigerant Oil: Capacity Specifications
REFRIGERANT OIL
TOTAL SYSTEM CAPACITY ............................................................................................................................................................. 177 ml (6.0 oz)
A/C COMPRESSOR
Add the same amount drained plus the amount collected during refrigerant recovery.
NOTE: Rotate the old A/C compressor shaft 8 to 10 full rotations (clockwise) while collecting the refrigerant oil in a clean measuring cup. Service
A/C compressors are shipped without refrigerant oil.
SUCTION ACCUMULATOR OR RECEIVER/DRIER
Add the quantity of oil drained, plus the amount collected during refrigerant recovery and 60 ml (2.0 fl oz).
EVAPORATOR CORE ........................................................................................................................................................................ 45 ml (1.5 fl oz.)
NOTE: Added to the amount collected during refrigerant recovery.
CONDENSER CORE ........................................................................................................................................................................... 60 ml (2.0 fl oz.)
NOTE: Added to the amount collected during refrigerant recovery.
EVAPORATOR CORE ORIFICE OR THERMOSTATIC EXPANSION VALVE
The amount collected during refrigerant recovery.
A/C PRESSURE RELIEF VALVE ...................................................................................................................................................... 60 ml (2.0 fl oz.)
REFRIGERANT HOSE/LINE ............................................................................................................................................................. 60 ml (2.0 fl oz.)
NOTE: If an excessive amount of refrigerant oil is lost due to a hose rupture/separation or other damage, the total system refrigerant oil capacity
must be added.
O-RING LEAK REPAIR ..................................................................................................................................................................... 60 ml (2.0 fl oz.)
NOTE: The amount specified may be used for one or multiple O-ring leak repairs. Do not multiply the refrigerant oil amount by the number of
O-ring leaks being repaired.
SERVICE PORT LEAK REPAIR ....................................................................................................................................................... 60 ml (2.0 fl oz.)