Fusion L4-2.3L VIN Z (2006)
5. Remove the transaxle fluid pan.
^
Remove the bolts.
^
Using a suitable tool, separate the bead of sealer.
6. Clean the silicone from the transaxle fluid pan and transaxle case surfaces thoroughly with metal surface cleaner.
Installation
1. Apply a bead 1-1/2 millimeters thick of sealer to the transaxle on the fluid pan sealing surface.
2. Install the transaxle fluid pan.
^
Tighten to 7 Nm (62 inch lbs.).
3. Install the splash shield.
4. Fill the transaxle with clean automatic transmission fluid.