Fusion L4-2.3L VIN Z (2006)
4. If equipped, remove the 7 screws and the underbody cover.
5. Disconnect the evaporative emission (EVAP) tube-to-throttle body adapter quick connect coupling.
6. Disconnect the fuel supply tube-to-fuel rail quick connect coupling.
7. Remove the EVAP tube and fuel supply tube from the engine mounted fuel tube bundle retainer clip.
8. Remove the 2 nuts and the upper cowl heat shield.
-
To install, tighten to 9 Nm (80 lb-in).
9. Remove the 2 nuts and the lower cowl shield.
-
To install, tighten to 9 Nm (80 lb-in).
10. Disconnect the EVAP tube-to-purge valve quick connect coupling.
11. Disconnect the EVAP test port-to-purge valve quick connect coupling.
12. Disconnect the EVAP test port tube-to-EVAP tube quick connect coupling.
