Fusion L4-2.3L VIN Z (2006)
3. Disconnect the electrical connector and remove the OCS module.
4. To install, reverse the removal procedure.
5. Install the passenger seat and repower the supplemental restraints system (SRS). Do not prove out the SRS at this time.
6. Carry out the appropriate procedure after installation of an OCS system component.
-
If installing the original OCS system component, carry out the Zero Seat Weight Test and prove out the SRS. See: Air Bag Systems/Testing
and Inspection/Component Tests and General Diagnostics/Zero Seat Weight Test
-
If installing a new OCS system component, carry out the System Reset procedure and prove out the SRS. See: Air Bag Systems/Testing and
Inspection/Component Tests and General Diagnostics/System Reset