Fusion L4-2.3L VIN Z (2006)
4. Remove the front splash shield.
1
Remove the 2 screws.
2
Remove the 4 retainers.
3
Remove the 4 bolts and the splash shield.
5. Disconnect the lower transmission fluid cooler tube from the radiator.
6. CAUTION: Use care not to over stretch or extend the hose clamps.
CAUTION: The hose clamps are held on the hose with a special epoxy. Damage may occur to the hose if the clamp is removed from the hose. If
the clamp or hose is damaged, replace the entire fluid cooler tube.
