Fusion L4-2.3L VIN Z (2006)
Selector Shaft: Service and Repair
Manual Control Lever Shaft and Seal
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
3. Remove the air cleaner assembly. For additional information, refer to Fuel Delivery and Air Induction.
4. Disconnect the shift cable end.
5. Disconnect the transmission control module (TCM) electrical connector.
6. Remove the manual control lever nut.
