Fusion L4-2.3L VIN Z (2006)
Transmission Cooler: Testing and Inspection
6 Speed Automatic Transaxle
Initial Inspection
Inspection and Verification
1. Verify the customers concern by operating the vehicle to duplicate the condition.
2. If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.
3. Install new components if a fluid leak is found in any of the transaxle cooling components.
4. If the concern(s) remains after the inspection, determine the symptom(s). GO to Symptom Chart. See: Diagnosis By Symptom
Diagnosis By Symptom
Symptom Chart
Symptom Chart