ford Workshop Repair Guides

Ford Fusion Workshop Service and Auto Repair Manuals

ABOUT US
211-05 Steering Column Switches > < Steering Column

Removing and Installing Steering Column for Fusion 200275 (062002-)

Steering Column - Steering Column Fusion 2002.75 (06/2002-)
Disassembly and Assembly

Disassembly

All vehicles
  1. Remove the steering wheel.

  1. CAUTION:
    CAUTION:Make sure the clockspring is not allowed to rotate. Secure in the central position with a piece of suitable tape.
    Remove the multifunction switches.
    1. Depress the locking tangs.
    1. Lift the switches upwards.

  1. Remove the clockspring.
    1. Remove the retaining screw.
    1. Release the locking tangs.

  1. Remove the ignition switch.
    • Release the locking tangs.

  1. Remove the passive anti-theft system (PATS) transceiver.
    • Release the locking tangs.
Left-hand drive vehicles
  1. Remove the ignition lock cylinder.
    1. Insert and turn the ignition key to position 1.
    1. Using a thin bladed screwdriver, depress the detent.
Right-hand drive vehicles
  1. Remove the ignition lock cylinder.
    1. Insert and turn the ignition key to position 1.
    1. Using a thin bladed screwdriver, depress the detent on both sides.

Assembly

  1. To assemble, reverse the disassembly procedure.

211-05 Steering Column Switches > < Steering Column