ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Door Window Regulator Motor > < Front Door Window Regulator

Fusion 2002.75 (06.2002-)

Glass, Frames and Mechanisms - Front Door Window Glass Fusion 2002.75 (06/2002-)
Removal and Installation

Removal

All vehicles
  1. Remove the front door trim panel.
    For additional information, refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Vehicles with power windows
  1. Connect the power window control switch electrical connector.
Vehicles with manual windows
  1. Install the window regulator handle.
All vehicles
  1. Remove the grommets.

  1. Loosen the front door window glass clamp bolts.
    • Align the window glass clamp bolts with the access holes.

  1. Detach the front door window glass from the window glass clamp.
    1. Move the front door window glass slightly towards the rear of the door.
    1. Lift the front door window glass out of the fixing.

  1. NOTE:
    NOTE:The front door window glass must be removed towards the outside of the window opening.
    Remove the front door window glass.
    1. Lift the glass.
    1. Tip the glass forwards and remove the glass from the front door.

Installation

  1. NOTE:
    NOTE:The front door window glass must be installed from the outside of the window opening.
    To install, reverse the removal procedure.

Front Door Window Regulator Motor > < Front Door Window Regulator