Fusion AWD L4-2.3L (2008)
-
To access the glass screws, unclip the top portion of the concertina blind and position aside as shown.
-
To install, tighten to 6 Nm (53 lb-in).
3. To install, reverse the removal procedure.
-
Verify that the roof opening panel is centered and aligned before tightening the screws. For additional information, refer Roof Opening Panel
Alignment. See: Adjustments/Roof Opening Panel Alignment
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization. See: Testing and
Inspection/Programming and Relearning
