Fusion AWD L4-2.3L (2008)
5. Remove and discard the bolt and disconnect the steering column shaft from the steering gear.
6. CAUTION: Remove the steering gear/dash seal or damage to the seal may occur.
Remove the steering gear/dash seal.
7. Remove the battery and battery tray. For additional information, refer to Battery.
8. NOTE: Battery mounting bracket removed for clarity.
Disconnect the electrical connectors from the PCM.
^
Detach the wiring harness retainer from the PCM bracket and position the harness aside.
9. Remove the pressure line-to-steering gear banjo bolt.
^
Discard the bolt and 2 seals.
10. Remove the pressure line bracket-to-steering gear bolt.
11. NOTE: RH side shown, LH side similar.
Remove 4 screws from each side and position the RH and LH fender splash shield aside.