Fusion AWD L4-2.3L (2008)
NOTICE: The rear subframe must be secured to the lifting table. The rear subframe can become unstable and fall from the lifting table.
NOTE: For All-Wheel Drive (AWD) vehicles, the rear differential is removed with the rear subframe.
14. Position the Powertrain Lift Table under the rear subframe.
15. Remove the 4 front (2 each side) bushing brace-to-body bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
16. Remove the 2 front (1 each side) mounting nuts and washers.
-
To install, tighten to 115 Nm (85 lb-ft).
