Fusion AWD L4-2.3L (2008)
3. Insert the return hose into a calibrated 10L (10.5 qt) container.
4. CAUTION: To prevent damage to the transaxle, do not run the engine above idle.
NOTE: If the fluid return rate is less than 0.95L (1.0 qt) in 30 seconds, or if the return hose pulsates, check for restrictions at the pump,
transmission fluid cooler or transmission fluid cooler lines.
Run the engine at idle and pump out 3L (3.17 qt) of transmission fluid.
5. Switch OFF the engine.
6. Remove the transmission fluid level indicator from the transmission fluid level indicator tube.
7. Add 3L (3.17 qt) of transmission fluid to the transaxle.
8. CAUTION: To prevent damage to the transaxle, do not run the engine above idle.
NOTE: If the transmission fluid return rate is less than 0.95L in 30 seconds, or if the return hose pulsates, check for restrictions at the pump,
transmission fluid cooler or transmission fluid cooler lines.
Run the engine at idle and pump out 3L (3.17 qt) of automatic transmission fluid.
9. Switch OFF the engine.
10. Add 3L (3.17 qt) of transmission fluid to the transaxle.
