Fusion AWD L4-2.3L (2008)
4. Position the LH splash shield in place and install the 4 screws.
5. Install the 2 upper bolts.
^
Tighten to 62 Nm (46 lb-ft).
6. Install the 2 transaxle support insulator bolts.
^
Tighten to 90 Nm (66 lb-ft).
4. Position the LH splash shield in place and install the 4 screws.
5. Install the 2 upper bolts.
^
Tighten to 62 Nm (46 lb-ft).
6. Install the 2 transaxle support insulator bolts.
^
Tighten to 90 Nm (66 lb-ft).