Fusion AWD V6-3.0L (2009)
Position the coolant pump pulley over the previously installed Camshaft Pulley Installer on the end of the camshaft. Install the Camshaft Pulley
Installer, Water Pump Pulley Spacer and the Power Steering Pump Pulley Installer as shown in the illustration.
-
Using the Camshaft Pulley Installer, Water Pump Pulley Spacer and the Power Steering Pump Pulley Installer, install the coolant pump pulley
flush with the end of the camshaft.
6. Install the coolant pump belt.
7. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and
Repair/Cooling System Draining, Filling and Bleeding.