Fusion AWD V6-3.0L (2009)
Installation
1. NOTE: Lubricate the valve guide with clean engine oil.
Using the Valve Stem Oil Seal Installer, install the new valve seal.
2. NOTICE: If the components are to be reinstalled, they must be installed in their original positions or damage to the engine may occur.
Using the Valve Spring Compressor, install the valve spring, retainer and key.
3. Install the camshaft roller followers. For additional information, refer to Camshaft Roller Follower See: Camshaft, Lifters and Push Rods/Rocker
Arm Assembly/Service and Repair/Removal and Replacement/Camshaft Roller Follower.