Fusion AWD V6-3.0L (2009)
Compass: Service and Repair
Compass Calibration
Compass Calibration
1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential
electrical accessories (rear window defrost, heater, A/C, map lamps, wipers, etc.) and make sure all doors are closed.
Start the vehicle.
2. Press the RESET button until RESET FOR CAL/INFO TO EXIT is displayed in the message center display.
3. NOTE: This will take up to 3 circles to complete calibration.
Slowly drive the vehicle in a circle at no more than 5 km/h (3 mph) until SLOW CIRCLES TO CALIBRATE changes to CALIBRATION
COMPLETED in the message center.
4. The compass is now calibrated.
