Fusion AWD V6-3.0L (2009)
NOTE: RH shown, LH similar.
Using a small screwdriver as shown, lift up and release the locking buttons on the passenger air bag module electrical connectors.
19. NOTICE: Do not pull the passenger air bag module electrical connectors out by the locking buttons. Damage to the locking buttons can
occur.
NOTE: Fusion and Milan shown, MKZ similar.
NOTE: RH shown, LH similar.
With the locking buttons released, remove the electrical connectors and the passenger air bag module.
20. From under the rear of the passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and then
release the tab and disconnect the passenger seat side air bag module electrical connector.
21. Remove the RH C-pillar trim cover retainer cap.
22. Remove the retainer and RH C-pillar trim cover.
23. Disconnect the RH side air curtain module electrical connector.
24. Remove the LH C-pillar trim cover retainer cap.
25. Remove the retainer and LH C-pillar trim cover.
26. Disconnect the LH side air curtain module electrical connector.