Fusion AWD V6-3.0L (2009)
-
Tighten to 8 Nm (71 lb-in).
14. Align the 2 retaining clips and install the RH instrument panel trim panel.
15. Through the glove compartment opening and the side of the instrument panel, install the 5 RH instrument panel trim panel nuts on the inside of the
instrument panel.
16. Install the instrument panel end panel.
Fusion and Milan
17. NOTICE: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the passenger air bag
module may occur.
NOTE: During air bag module installation, make sure all the deployment door clips are fully seated in the instrument panel.
Install the passenger air bag module into the instrument panel.
18. Install the 2 passenger air bag module bolts.
-
Tighten to 8 Nm (71 lb-in).
