Fusion AWD V6-3.0L (2009)
10. Add 3L (3.17 qt) of transmission fluid to the transaxle.
11. NOTICE: To prevent damage to the transaxle, do not run the engine above idle.
Run the engine at idle and pump out 3L (3.17 qt) of transmission fluid.
12. Switch OFF the engine.
13. Raise the vehicle.
14. Connect the transmission fluid cooler return hose to the transaxle.
15. Add 3L (3.17 qt) of transmission fluid to the transaxle.
16. Install the transmission fluid level indicator in the transmission fluid level indicator tube.
17. NOTICE: To prevent damage to the transaxle, do not run the engine above idle.
Run the engine.
18. Check the transmission fluid level and fill if necessary.
