Fusion AWD V6-3.0L (2009)
-
History - Software
-
Date/Time: date and time of any recorded software installation
-
VIP: VIP software that was installed at that time
-
CIP: CIP software that was installed at that time
-
Description: a description of the content of the software revision
-
Available Software for Programming
-
Select: allows the software package to be selected
-
Lineage: the original software release, if the software available is a revision
-
VIP: VIP software level that is available with the selection
-
CIP: CIP software level that is available with the selection
-
Description: a description of the content of the software revision
9. Click a CIP software level to view the device compatibility list associated with the CIP software level, if desired.
10. To exit the APIM software level check, disconnect the scan tool from the DLC and the USB port, or exit the OASIS screen.
Audio Unit Part Number Retrieval
Audio Unit Part Number Retrieval
Audio Systems Without Navigation
NOTE: The terms "Audio Control Module (ACM)" and "audio unit" refer to the same component.
1. Turn the ACM on.
2. Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
3. Before the speaker walk-around test is complete, press preset button 6.
4. NOTE: This step will cause the ACM to auto-scroll through configuration 1, configuration 2, EEPROM number, and ACM part number.
Press the TUNE UP button.
5. NOTE: Step 4 may need to be repeated until the ACM part number can be recorded.
Record the ACM part number.
6. Turn the ACM off.
Navigation Audio System
1. Turn the ACM on.
2. Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
3. Before the speaker walk-around test is complete, press END TEST on the display screen.
4. Select SYSTEM INFO from the menu.
5. Record the ACM part number.
6. Turn the ACM off.
Satellite Radio Receiver Electronic Serial Number (ESN) Retrieval
