ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Trim Cover - Passenger|Page 6239 > < Air Bag Trim Cover - Passenger|Page 6237
Page 2
background image

Removal

WARNING: Always carry or place a live air bag module with the air bag and deployment door/trim cover/tear seam pointed away from the
body. Do not set a live air bag module down with the deployment door/trim cover/tear seam face down. Failure to follow these instructions may
result in serious personal injury in the event of an accidental deployment.

WARNING: Never probe the electrical connectors on air bag, Safety Canopy(R) or side air curtain modules. Failure to follow this instruction
may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.

NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

All vehicles

1. Depower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering  See: Air Bag(s)

Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion.

2. Open the glove compartment door, release the door damper cable and fully lower the door.

MKZ

3. Remove the instrument panel end panel.

Air Bag Trim Cover - Passenger|Page 6239 > < Air Bag Trim Cover - Passenger|Page 6237