Fusion AWD V6-3.0L (2009)
of serious personal injury or death in a crash.
WARNING: Inspect a Safety Canopy(R) or side air curtain module before installation. If the module is damaged, the cover has separated
or the Safety Canopy(R) or side air curtain material has been exposed, install a new module. Do not attempt to repair the module. Failure
to follow these instructions may result in the Safety Canopy(R) or side air curtain deploying incorrectly, which increases the risk of
serious personal injury or death in a crash.
WARNING: Never put any type of fastener or tie strap around any part of a Safety Canopy(R) module, side air curtain module or
interior trim panel. This will prevent the Safety Canopy(R) or side air curtain module from deploying correctly. Failure to follow this
instruction may increase the risk of serious personal injury or death in a crash.
NOTE: Make sure all side air curtain module bolt holes line up with each sheet metal hole.
To install, reverse the removal procedure.
12. Install the headliner.
13. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Air Bag(s)
Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion.
