Fusion AWD V6-3.0L (2009)
clip and push in, disengaging the clip from the locking pin. With the spring clip disengaged from the locking pin, gently pull back on that side of
the driver air bag module to release it from the steering wheel.
8. Repeat the previous step for the second locking pin.
9. NOTICE: Do not pull the driver air bag module electrical connectors out by the locking buttons. Damage to the locking buttons can
occur.
Using a small screwdriver as shown, lift up and release the locking buttons on the driver air bag module electrical connectors. With the locking
buttons released, remove the electrical connectors and the driver air bag module.
10. Open the glove compartment door and release the door damper cable, then fully lower the glove compartment door.
Fusion and Milan
11. Remove the 2 passenger air bag module bolts.
12. NOTICE: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the passenger air bag
module may occur.
Release the deployment door clips from the instrument panel and then remove the passenger air bag module from the instrument panel.
