Fusion AWD V6-3.0L (2009)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
3. Remove the bolt and the CKP.
-
To install, tighten to 10 Nm (89 lb-in).
4. NOTE: Lubricate the CKP O-ring seal with clean engine oil.
To install, reverse the removal procedure.
