Fusion AWD V6-3.0L (2009)
Removal
NOTICE: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may result
in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct
retention of these parts.
1. Remove the wheel and tire.
2. If equipped, remove the wheel speed sensor bolt.
3. If equipped, remove the wheel speed sensor harness bolt and position the wheel speed sensor aside.
4. Remove the brake flexible hose bracket-to-wheel knuckle bolt and position the hose and bracket aside.
5. NOTE: Apply the brake to keep the halfshaft from rotating.
Remove and discard the wheel hub nut.
6. NOTICE: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
