Fusion AWD V6-3.0L (2009)
5. Install the ACL.
6. Install the exhaust Y-pipe.
All vehicles
7. Position the transaxle support insulator in place and install the lower 2 transaxle insulator-to-frame bolts.
-
Tighten to 62 Nm (46 lb-ft).
8. Position the LH front structure-to-subframe splash shield in place and install the 6 pin-type retainers.
9. Position the LH splash shield in place and install the 4 screws.
3.0L engine
10. Install the 2 transaxle support insulator-to-bracket bolts.
-
Tighten to 90 Nm (66 lb-ft).
