Fusion AWD V6-3.0L (2009)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Removal
1. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.
2. Remove the bolt and the TSS sensor.
-
To install, tighten to 10 Nm (89 lb-in).
-
Check the TSS sensor bore.
-
Check the O-ring seal for nicks or cuts and install a new O-ring if necessary.
