Fusion FWD L4-2.3L (2008)
^
To install, tighten to 20 Nm (15 lb-ft).
4. Remove the brake disc.
5. NOTE: During installation, make sure that the brake caliper hose does not become twisted.
NOTE: Make sure the brake disc-to-hub mounting surface is free of rust and foreign material before applying anti-seize lubricant.
NOTE: Do not allow anti-seize to make contact with the wheel studs.
To install, reverse the removal procedure.
Disc Removal and Installation, Rear
Brake Disc
Material
NOTE: Front wheel drive (FWD) shown, all wheel drive (AWD) similar.
