Fusion FWD L4-2.3L (2008)
8. Repeat the previous step for the second locking pin.
9. CAUTION: Do not pull the driver air bag module electrical connectors out by the locking buttons. Damage to the locking buttons can
occur.
Using a small screwdriver as shown, lift up and release the locking buttons on the driver air bag module electrical connectors. With the locking
buttons released, remove the electrical connectors and the driver air bag module.
10. Open the glove compartment door and release the door damper cable, then fully lower the glove compartment door.
Fusion and Milan
11. Remove the 2 passenger air bag module bolts.