Fusion FWD L4-2.3L (2008)
Installation
Vehicles equipped with a TC switch
1. Route the TC switch wiring harness through the selector lever knob bezel and the PRNDL bezel.
All vehicles
2. CAUTION: Be sure that the override lever is inserted in the override lever guide or the shift interlock override button will not work
correctly.
NOTE: Selector lever removed for clarity.
Install the PRNDL bezel, selector lever knob and knob bezel on the selector lever.
^
Position the override lever in the override lever guide.
^
Make sure that the 3 locking tabs are locked in place.
Vehicles equipped with a TC switch
3. Connect the TC switch electrical connector and install the wiring harness retainer on the selector lever housing.