Fusion FWD L4-2.3L VIN Z (2007)
5. Pull the head of the RH recliner outboard cover retainer up to release, then remove the retainer.
6. Remove the RH recliner outboard cover.
1
Pull out on the RH recliner outboard cover at the front and rear to release the cover retainers and at the bottom, pull the cover away from the
recliner.
2
Slide the RH recliner outboard cover back to separate from the recliner.
-
If not equipped with side air bags, remove the RH recliner outboard cover.
Seats with side air bags
7. Route out the side air bag wire harness and remove the RH recliner outboard cover.
All seats
8. Separate the cable at the RH recliner.
1
Release the cable housing from the RH recliner.
2
Separate the cable from the RH recliner.
