Fusion FWD L4-2.3L VIN Z (2007)
10. NOTE: Only turn the engine in the normal direction of rotation.
Turn the crankshaft clockwise until the crankshaft contacts the special tool.
11. CAUTION: Only hand-tighten the bolt or damage to the front cover can occur.
Using the 6 mm (0.23 inch) x 18 mm (0.7 inch) bolt, check the position of the crankshaft pulley.
^
If it is not possible to install the bolt, the engine valve timing must be corrected by repeating this procedure.
12. Using the special tool, check the position of the camshafts.
^
If it is not possible to install the special tool, the engine valve timing must be corrected by repeating this procedure.
