Fusion FWD L4-2.3L VIN Z (2007)
Air Door Actuator / Motor: Service and Repair
Mode Door Actuator - Defrost/Panel/Floor Door
MODE DOOR ACTUATOR - DEFROST/PANEL/FLOOR DOOR
Removal and Installation
1. Remove the instrument panel.
2. Disconnect the LH temperature blend door actuator electrical connector.
3. Remove the 2 LH temperature blend door actuator screws.
4. Remove the LH temperature blend door actuator.
5. Disconnect the DEFROST/PANEL/FLOOR mode door actuator electrical connector.
6. Remove the 3 DEFROST/PANEL/FLOOR mode door actuator and cam assembly screws.
7. Remove the DEFROST/PANEL/FLOOR mode door actuator and cam assembly.
8. To install, reverse the removal procedure.