Fusion FWD L4-2.3L VIN Z (2007)
Fluid - M/T: Service and Repair
Transaxle Draining and Filling
Material
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the drain plug and drain the fluid.
-
Position a drain pan under the transaxle.
3. Install a new washer and the drain plug.
-
Tighten to 49 Nm (36 ft. lbs.).
4. NOTE: Prior to removal, clean the area of the fill plug.
Remove the fill plug.
5. NOTE: Do not overfill the transaxle. This will cause transaxle fluid to be forced out of the case.
Fill the transaxle will the recommended fluid.
