ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Restraints - Control Module DTCs & Associated Fault PIDs|Page 272 > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 270
Page 2
background image

Removal

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

The restraints control module (RCM) orientation is critical for correct air bag SRS operation. If a vehicle equipped with an SRS system
has been involved in a collision in which the center tunnel area has been damaged, inspect the mounting and bracket for deformation. If
damaged, a new RCM must be installed whether or not the air bags have deployed. In addition, make sure the area of the RCM is
restored to its original condition.

-

To reduce the risk of personal injury, do not use any memory saver devices.

CAUTION:

-

When installing a new RCM, always make sure the correct RCM is being installed. The RCM 40-pin connector is keyed differently for
vehicles with safety curtains and side air bags than the 40-pin connector for vehicles without safety curtains and side air bags. Do not

Restraints - Control Module DTCs & Associated Fault PIDs|Page 272 > < Restraints - Control Module DTCs & Associated Fault PIDs|Page 270